MELBORI JEWELS -- SIZING REFERENCES

Jewel Size Guid For Your Perfect Fit

Use our guide to find your exact size at home | rings, bracelets, necklaces & earrings.

_______________✦______________

Ring Size Guide

How To Measure Ring Size ? Without Having a Ring
  1. Measure the string or paper with a ruler.

2. Wrap a strip of paper or a piece of string around the base of your finger.

3. Mark the point where the ends meet.

4. Compare your measurement to our chart below to find your size.

Second Method (With Having Ring)

1. Choose a ring that fits the finger you want to waer your new ring on.

2. Place the ring flat surface and measure the inside diameter (the widest part) in millimeters (mm).

3. Write down inside diameter in millimters.

4. Use the inside diameter measurement to Find your perfect size form below size chart table.

International Ring Size Chart

Find your perfect ring size using our international conversion chart

USA/Canada UK/Australia Europe India Japan Diameter (mm) Circumference (mm)
3 F 44 6 5 14.0 44.0
3.5 G 45 7 6 14.4 45.2
4 H 46 8 7 14.8 46.5
4.5 I 47 9 8 15.3 48.0
5 J 48 10 9 15.7 49.3
5.5 K 49 11 10 16.1 50.6
6 L 51 12 11 16.5 51.9
6.5 M 52 13 12 16.9 53.1
7 N 53 14 13 17.3 54.4
7.5 O 54 15 14 17.7 55.7
8 P 56 16 15 18.1 57.0
8.5 Q 57 17 16 18.5 58.3
9 R 58 18 17 19.0 59.5
9.5 S 59 19 18 19.4 60.8
10 T 61 20 19 19.8 62.1
10.5 U 62 21 20 20.2 63.4
11 V 63 22 21 20.6 64.6
11.5 W 64 23 22 21.0 65.9
12 X 66 24 23 21.4 67.2
12.5 Y 67 25 24 21.8 68.5
13 Z 68 26 25 22.2 69.7
The measurement of length is in millimetres as per Legal Metrology Act, 2009. Conversion values may slightly vary due to rounding.

Bracelet Size Guide

Size Guide For Openable Bangle / Bracelet (with lock)

Finding the correct size for an openable bangle or bracelet with a lock is simple because it does not need to pass over your hand. Instead, you only need to measure your wrist circumference for a comfortable and secure fit.


Whether you're shopping for a diamond bracelet, gold bracelet, silver bracelet, tennis bracelet, or hinged bangle, this guide will help you choose the perfect size.

How to Measure Your Wrist

Step 1: Wrap a Measuring Tape
Wrap a soft measuring tape around your wrist where you normally wear your bracelet.
Step 2: Mark the Measurement
The tape should fit snugly without being too tight. Record your wrist measurement in centimeters (cm) or inches.
Step 3: Choose Your Bracelet Size
Add extra length based on your preferred fit:
Fit StyleAddSnug Fit+0.5 cmComfort Fit+1.0 – 1.5 cmLoose Fit+2.0 cm

Why Openable Bangles Are Different

Unlike traditional closed bangles, openable bangles with a lock or hinge open and close around your wrist. This means you do not need to measure your hand or knuckles. Simply measure your wrist for the most accurate size.

This sizing method is suitable for:

  • Diamond Bracelets
  • Tennis Bracelets
  • Gold Lock Bracelets
  • Silver Bracelets
  • Hinged Bangles
  • Openable Bangles
  • Kada Bracelets
  • Luxury Bracelets
  • Designer Bracelets

Tips for the Perfect Fit

  • Measure your wrist at the end of the day for the most accurate size.

  • Use a flexible measuring tape for best results.

  • If you're between two sizes, choose the larger size for extra comfort.

  • For thicker bracelets, consider sizing up by 0.5 cm.

Size Guide For Non-Openable Bangle / Bracelet (without lock)

Choosing the correct size for a non-openable bangle or bracelet without a lock is essential for a comfortable fit. Since the bangle does not open, it must slide comfortably over your hand. To find the right size, measure the widest part of your hand—not your wrist.

This guide is suitable for gold bangles, diamond bangles, silver bangles, plain bangles, kada bangles, and traditional closed bracelets.

How to Measure Your Hand for a Non-Openable Bangle

Option 1: Measure Your Hand Diameter

1. Bring your thumb across your palm to touch your little finger (as if putting on a bangle).

2.Measure the widest distance across your hand using a ruler.

3.Record the measurement in centimeters (cm) or millimeters (mm).

4.Compare it with the size chart below to find your perfect bangle size.


Option 2: Measure Your Hand Circumference

1.Bring your thumb across your palm to touch your little finger.

2.Wrap a flexible measuring tape around the widest part of your hand (including the thumb knuckle).

3.Record the circumference measurement.

4.Use the size chart below to determine your correct bangle size.

Tips for Choosing the Right Bangle Size

  1. Measure your hand—not your wrist.

2 . Keep your fingers together and fold your thumb into your palm while measuring.

3 . Measure your hand at the end of the day when it is at its largest.

4 . If your measurement falls between two sizes, choose the larger size.

5 . Wide bangles may require a slightly larger size for added comfort.

Why Hand Measurement Matters

Unlike openable bracelets or lock bangles, a non-openable bangle must pass over your knuckles. Measuring only your wrist can result in purchasing a size that won't fit over your hand. Measuring the widest part of your hand ensures the bangle slides on comfortably while fitting securely around your wrist.

This sizing guide is ideal for:

  • Gold Bangles
  • Diamond Bangles
  • Silver Bangles
  • Plain Gold Bangles
  • Traditional Indian Bangles
  • Kada Bangles
  • Closed Bangles
  • Non-Openable Bracelets
  • Bridal Bangles
  • Daily Wear Bangles

Frequently asked questions

How do I measure for a non-openable bangle?

Measure the widest part of your hand with your thumb folded into your palm. Use either a ruler to measure the hand diameter or a measuring tape to measure the hand circumference.
How do I know if my bracelet fits correctly?

A properly fitting bracelet should move comfortably on your wrist without sliding off your hand or feeling too tight.
Do men's and women's jewelry use different sizing?

Sizing is based on measurements rather than gender. Men's jewelry is generally available in larger sizes, while women's jewelry is available in smaller sizes.
Can I wear a bangle if my hand is larger than my wrist?

Yes. For non-openable bangles, always measure the widest part of your hand to ensure the bangle passes comfortably over your knuckles.
How can I contact you if I need sizing assistance?

If you're unsure about your size, our customer support team is happy to help. Contact us before placing your order, and we'll guide you in selecting the perfect fit.
How do I measure my ring size at home?

Wrap a strip of paper or a measuring tape around the base of your finger, mark where it overlaps, measure the length in millimeters, and compare it with our ring size chart. You can also measure the inside diameter of an existing ring.
How do I measure my bracelet size?

Measure your wrist using a flexible measuring tape. Add extra length depending on your preferred fit:

  • Snug Fit: +0.5 cm
  • Comfort Fit: +1.0–1.5 cm
  • Loose Fit: +2.0 cm
How do I measure for an openable bangle or bracelet with a lock?


Openable bangles and lock bracelets open around your wrist, so simply measure your wrist circumference and choose the recommended size from our bracelet size chart.
What if I'm between two sizes?

If your measurement falls between two sizes, we recommend choosing the larger size for a more comfortable fit.
Does jewelry width affect sizing?

Yes. Wider rings, bangles, and bracelets may fit more tightly than thinner designs. Consider choosing one size larger for wider styles.
Should I measure my finger or wrist in the morning?

For the most accurate measurement, measure your finger or wrist at the end of the day when it is at its largest. Avoid measuring when your hands are cold.
Are jewelry sizes the same worldwide?

No. Ring and jewelry sizing varies by country. Please refer to our International Size Chart to compare US, UK, EU, India, Japan, and other international sizes.
How accurate are the size charts?

Our size charts follow standard international jewelry sizing. However, slight variations may occur depending on the jewelry design, band width, and manufacturing process.
Can I use an existing ring or bracelet to find my size?

Yes. Measure the inside diameter of an existing ring or the inner diameter of a bangle and compare it with our size charts for the best match.
What measuring tools do I need?

You can use:

  • Flexible measuring tape
  • Ruler
  • Strip of paper
  • String
  • Existing ring or bracelet for comparison
What if I order the wrong size?

If you accidentally order the wrong size, please contact our customer support as soon as possible. Depending on the product and order status, we may be able to assist with an exchange or resizing.
Do gemstones or settings affect the fit?

Yes. Rings with large center stones or wide settings may feel tighter. For these styles, many customers prefer sizing up by half a size.
Should I measure my wrist?

No. For non-openable bangles, always measure your hand, as the bangle must slide over your knuckles.
What if I'm between two sizes?

Choose the larger size for a more comfortable fit.
Does the width of the bangle affect sizing?

Yes. Wider bangles generally feel tighter, so sizing up slightly is recommended.